Multi-Tube Vortex Mixer Process 50 Samples At The Same Time Various Accessories Optional
JiAn Biotech specializes in manufacturing laboratory equipment, such as multi-tube vortex mixers with brushless DC motors and microcomputer control technology. Unique key operation mode, easy to operate. By replacing different test tube fixing sponges, various common test tubes can be mixed and cultured, and 50 samples can be mixed and processed at the same time. Suitable for fields such as biotechnology, microbiology, and medical analysis. The Multi-Tube Vortex Mixer is an ideal automation tool for reaction processes such as sample incubation, catalysis, mixing, and storage. For some insoluble drugs such as erythromycin, the staining solution can also be mixed well, and the effect is remarkable. The mixed liquid does not need electric stirring and magnetic stirring, so the mixed liquid is not affected by external pollution and magnetic field. Therefore, as a powerful tool for analytical analysis, it can make experiments more convenient and faster. Multi-tube vortex mixer can be used with test tubes such as centrifuge tubes and test tubes.
1. The instrument should be placed on a flat surface, preferably a glass table. Gently press the instrument down so that the rubber pad on the bottom of the instrument rests on the table.
2. Before using the instrument, set the controller to the lowest position and turn off the power switch.
3. If the motor does not turn on when the power switch is turned on, check to see if the plug has good contact and if the fuse is blown (this should be done with the power off).
4. To keep the multi-tube vortex mixer running smoothly and to avoid strong vibrations, all test bottles should be evenly distributed when filling, and the contents of each bottle should be approximately equal.
5. Turn on the unit, turn on the power switch, the indicator light is on, and slowly adjust the speed control knob to the desired speed.
6. The unit should be stored properly. It should be stored in a dry, ventilated place without corrosive gases. Do not let the liquid flow into the movement during use, so as not to damage the device.
More details
| | |
| | |
| | |
| | |
| | |
Interval Timing Between Impulse | |
Timing Set For Impuls Working | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
Optional Accessory
Please note: DMT-H is a standard accessory
| Cat # | Description | Number of holes | Dimension(mm) |
| DMT-A | Φ10mm foam tube frame | 50 | 245x132x45 |
| DMT-B | Φ12mm foam tube frame | 50 | 245x132x45 |
| DMT-C | Φ13mm foam tube frame | 50 | 245x132x45 |
| DMT-D | Φ16mm foam tube frame (suit for 15ml tube) | 50 | 245x132x45 |
| DMT-E | Φ25mm foam tube frame | 15 | 245x132x45 |
| DMT-F | Φ29mm foam tube frame (suit for 50ml tube) | 15 | 245x132x45 |
| DMT-G | Φ38mm foam tube frame (suit for 100ml tube ) | 10 | 245x132x45 |
| DMT-H | tray pad set (up pad & base pad) | / | 305x178.5x25 |
| DMT-I | acrylic tube frame Φ11mm (suit for1.5/2.0ml tube) | 40 | 169x84x41 |
Product Tags:
|
|
Multi Tube Vortex Mixer Process 50 Samples At The Same Time Images
|
